LED industrial and mining lights can work long-term and reliably in dusty and humid places with relatively poor environmental conditions. LED industrial and mining lights have special requirements in terms of structural design, housing and reflectors. There is a lot of knowledge about LED industrial and mining lights. Below, Yangzhong Hengyuan Lighting will introduce the applicable environment and purchase requirements of LED industrial and mining lights.
Applicable environment of LED industrial and mining lights
LED industrial and mining lighting should use closed lamps or convection lamps with upward luminous flux in dusty environments; while in humid environments, attention should be paid to the airtightness of the housing and the surface treatment of the reflector; generally indoors are more commonly used It is an open-type lamp, using an enamel surface reflector, a thick aluminum oxide film on the surface or an aluminum reflector coated with a silica protective film; considering the inevitable vibration in the production site, a fixed light source can be used Anti-loose lamp holders and so on.
Purchase requirements of LED industrial and mining lights
1. The color should be coordinated as much as possible to avoid glare, soft light and uniform brightness of the purchased LED industrial and mining lights, which can effectively avoid the eye fatigue of the constructors under long-term exposure.
2. In some relatively special occasions, such as the coal industry and other relatively flammable and explosive areas, a high explosion-proof level should be selected.
3. The structure of the lamp must use a high-strength alloy shell, so that the lamp can resist strong collision or impact to ensure personal safety.
Because LED industrial and mining lighting manufacturers can aim in any direction, and also have the conditions not to be affected by climatic conditions, so it has a wide range of use. The main application occasions are large-area workplaces, mines, monuments, building outlines, overpasses, stadiums, parks and flower beds. Generally speaking, large-area LED industrial and mining lights used outdoors can be called LED industrial and mining lights. Therefore, LED industrial and mining lighting manufacturers can be regarded as the "star" products of LED outdoor lighting.
The three-proof ceiling lamp uses high-efficiency gas discharge as the light source. The service life of the bulb is about 10,000 hours or more. It is very suitable for outdoor large-area and unattended lighting places. There is still a lot of knowledge about the three-proof ceiling lamp, the following Yangzhong Hengyuan Lighting introduces the spraying technology and process technology used by the three-proof ceiling lamp.